Robotics

Question 1

1Lithium-polymer (LiPo) batteries should be charged

Easy

A. with a proper balance charger and never left unattended B. inside a closed tin box while you sleep C. when punctured D. with any phone charger

Question 2

2Before working on a robot's wiring you should

Easy

A. disconnect the power B. increase the voltage C. run the motors D. remove the sensors only

Question 3

3Collaborative robots (cobots) are designed to

Easy

A. replace all workers B. work safely alongside humans C. move at maximum speed always D. work only in cages

Question 4

4Industrial robots are often surrounded by safety fences to

Easy

A. keep people out of their working area B. hide them C. make them faster D. cool them

Question 5

5Lithium batteries in robots should be

Easy

A. soaked in water B. charged with the correct charger and never punctured C. heated D. short-circuited

Question 6

6A light curtain around a robot cell

Easy

A. lights the room B. stops the robot when someone enters C. paints the robot D. charges the robot

Question 7

7An emergency stop button on a robot should

Easy

A. turn on lights B. cut power to the moving parts immediately C. speed the robot up D. reset the program only

Question 8

8Before working on a robot's moving parts, you should first

Easy

A. touch the motor while it runs B. increase the motor speed C. switch it off and disconnect its power D. remove the safety guard while it runs