Applied Technology

Question 1

1In first-angle projection, the plan is drawn

Medium

A. to the left of the end view B. on top of the end view C. above the front elevation D. below the front elevation

Question 2

2A try square is used to

Easy

A. cut wood B. check and mark right angles C. measure diameters D. drill holes

Question 3

3The reading on a steel rule is most accurate when you look

Easy

A. with one eye closed at an angle B. from below C. from an angle D. straight down at the mark

Question 4

4About how many millimetres are there in 1 inch?

Easy

A. 10 B. 2.54 C. 25.4 D. 100

Question 5

5A feeler gauge measures

Easy

A. weight B. large lengths C. small gaps between parts D. voltage

Question 6

6The smallest reading on a standard metric steel rule is usually

Easy

A. 1 cm B. 1 m C. 0.5 mm or 1 mm D. 0.01 mm

Question 7

7On an engineering drawing, a dimension of 50 ± 0.1 mm allows sizes from

Easy

A. 49.99 mm to 50.01 mm B. 49.9 mm to 50.1 mm C. 49 mm to 51 mm D. 50 mm to 50.1 mm

Question 8

8An outside caliper is used to

Easy

A. cut threads B. mark angles C. transfer outside diameters to a rule D. drill holes

Question 9

9Engineering drawings use

Easy

A. standard lines and symbols so anyone can read them B. only colours C. random marks D. only words

Question 10

10A drawing at a scale of 1 : 20 shows a wall 150 mm long. What is the real length?

Easy

A. 30 m B. 0.3 m C. 3 m D. 7.5 m