Applied Technology Mock 2023

Question 1 of 50

Long hair should be tied back in the workshop to

Question 2 of 50

The component that stores electric charge is a

Question 3 of 50

A multimeter can measure

Question 4 of 50

The four strokes of a petrol engine in order are

Question 5 of 50

A centre punch is used to

Question 6 of 50

A mortise and tenon joint is commonly used for

Question 7 of 50

The reading on a steel rule is most accurate when you look

Question 8 of 50

The clutch in a manual vehicle is used to

Question 9 of 50

MDF is made from

Question 10 of 50

Chipboard is made from

Question 11 of 50

A concrete mixer is used to

Question 12 of 50

An excavator is mainly used for

Question 13 of 50

The radiator in a car engine

Question 14 of 50

Engine oil mainly serves to

Question 15 of 50

The oil level in an engine is checked using the

Question 16 of 50

Shock absorbers in a vehicle

Question 17 of 50

Under-inflated tyres cause

Question 18 of 50

Power steering makes steering

Question 19 of 50

Rolling metal between rollers produces

Question 20 of 50

The jack plane is used for

Question 21 of 50

A coping saw is used for

Question 22 of 50

The circular saw machine is used for

Question 23 of 50

Formwork is

Question 24 of 50

PVA glue is used for

Question 25 of 50

Screws hold better than nails because they

Question 26 of 50

A butt joint is

Question 27 of 50

The colour of a safety sign that shows a mandatory instruction, such as "wear goggles", is

Question 28 of 50

The colour bands on a resistor show its

Question 29 of 50

The tool used to cut internal threads in a hole is a

Question 30 of 50

The hacksaw blade should be fitted with its teeth pointing

Question 31 of 50

The saw used for cutting along the grain is the

Question 32 of 50

On an engineering drawing, a dimension of 50 ± 0.1 mm allows sizes from

Question 33 of 50

Hydraulic brakes work on

Question 34 of 50

ABS in a car helps to

Question 35 of 50

An advantage of manufactured boards over solid wood is that they

Question 36 of 50

Site mobilisation includes

Question 37 of 50

Hoarding around a construction site

Question 38 of 50

The thermostat in the cooling system

Question 39 of 50

Annealing a metal makes it

Question 40 of 50

Quenching hot steel in water makes it

Question 41 of 50

Tempering after hardening

Question 42 of 50

Wheel alignment ensures that

Question 43 of 50

Drawing pulls metal through a die to make

Question 44 of 50

Extrusion pushes metal through a die to make

Question 45 of 50

Pressing sheet metal into shape with a die is

Question 46 of 50

A wood lathe is used for

Question 47 of 50

A pile foundation transfers loads to

Question 48 of 50

Releasing agents are applied to formwork to

Question 49 of 50

A dovetail joint is commonly used in

Question 50 of 50

A ring main circuit in a house is used for